Radius cutter, d=10 mm, z=2, blank, standard, HSSE-M42

SKU: 1154-007
GTIN: 0686641058848
Category: Radius Cutter

Coating
Diameter
length
material
Tooth

13,73 €

incl. 19% VAT , plus

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

Radius milling cutter made from HSSE-M42-Co8

Due to the high cobalt content (8%), the milling cutters have increased temperature stability and a higher hardness.
This allows higher cutting speeds to be realized.

The milling cutters are characterized by the following advantages

high wear resistance
high hardness
high rigidity
high temperature resistance

Technical data
Number of cutting edges )	2
Cutting material	HSSE-M42 / 8% cobalt
Coating	Blank
Standard	DIN327

Shank: DIN1835-B (shank with driving surface)

Dimensions (mm)
Diameter / (radius)	Shank diameter	Cutting length	Total length	Cutting edge
2,0 (R1,0)	6	4	48	2
3,0 (R1,50)	6	5	49
4,0 (R2,0)	6	7	51
5,0 (R2,5)	6	8	52
6,0 (R3,0)	6	8	52
8,0 (R4,00)	10	11	61
10,0 (R5,0)	10	13	63

Cutting speed and tooth feed:

Cutting data HSSE radius cutter
Material		Cutting speed (m/min)	Tooth feed (mm/rev)
Material		Cutting speed (m/min)	Ø 1-3 mm	Ø 4-5 mm	Ø 6 mm	Ø 8 mm	Ø 10 mm	Ø 12 mm	Ø 16 mm	Ø 20 mm
	Steel <850 N/mm²	25	0,005	0,008	0,010	0,015	0,024	0,032	0,050	0,060
	Steel <1000 N/mm²	20	0,003	0,006	0,008	0,012	0,022	0,030	0,045	0,052
	Gray cast iron	25	0,005	0,008	0,010	0,015	0,024	0,032	0,050	0,060
	Aluminum	120	0,005	0,010	0,012	0,020	0,030	0,042	0,080	0,085
	Plastic	300	0,015	0,040	0,080	0,085	0,900	0,100	0,120	0,150

The cutting data listed are guide values that must be adjusted depending on the specific boundary conditions
(stability and performance of the machine, workpiece clamping, type of coolant supply).