Solid carbide single flute cutter for aluminum d=3.175 mm, L=17mm (G), blank

Solid carbide single flute cutter for aluminum d=3.175 mm, L=17mm (G), blank

SKU: 1210-067
GTIN: 0686641065341
Category: Endmills

Cutting Diamter
length
Coating Blank: Blank

ZrN

11,79 €

incl. 19% VAT , plus

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

Solid carbide (VHM) milling cutter for aluminum & Dibond

The solid carbide cutters have been specially developed for cutting aluminum. The wide flute of the single flute cutter ensures optimum chip removal and thus prevents clogging of the cutting edge. The solid carbide cutters are characterized by the following advantages:

Wide, finely ground chip flute
Face cutting geometry for plunging.
Fine grinding of the cutting edges - resulting in clean workpiece surfaces.
high wear resistance

Materials: aluminum cast plates, rolled plates, Dibond, sandwich plates

ZrNcoating

A significant increase in service life can be achieved with the ZrN coating.
The multilayer coating protects the cutting edges from abrasive wear and reduces cutting forces.
Fewer tool changes and higher feed rates enable a significant increase in efficiency

Technical data (Tech specs)
Number of cutting edges (flutes)	1
Material (material)	VHM
Composition (composition)	90% Wc / 10% Co
Grain size	0.6 µm

-38

Diameter of	Shank	Cutting length / total length
Diameter of	Shank	Length A	Length B	Length C	Length D	Length E	Length F	Length G	Length H
1	3,175	3 / 38	4 / 38	-	-	-	-	-	-
1.2	3,175	3 / 38	-	-	-	-	-	- - -
1.5	3,175	5 / 38	-	-	-	-	-	-
2	3,175	4 / 38	6 / 38	8 / 38	12 / 38	-	-	-	-
2.5	3.175	4 /	6 / 38	8 / 38	12 / 38	-	-	- -
3.0	3.0	8 / 38	9 / 38	12 / 38	-	-	22 / 45	-	-
3,175	3,175	6 / 38	7 / 38	8 / 38	10 / 38	12 / 38	15 / 38	17 / 38	22 / 45
>4	4	8 / 45	12 / 45	15 / 45	17 / 45	22 / 45	-	-	-
5	5	12 / 50	15 / 50	17 / 50	-	22 / 50	-	-	-
6	6	12 / 50	15 / 50	17 / 50	22 / 50	25 / 50	28 / 60	32 / 60	-
8	8	22 / 60	25 / 60	-	32 / 65	-	-	-	-
10	10	25 / 75	32 / 75	42 / 85	-	-	-	-	-
12	12	35 / 75	42 / 75	-	-	-	-	-	-

Cutting data solid carbide end mills
Material		Cutting speed (m/min)	Tooth feed (mm/rev)
Material		Cutting speed (m/min)	Ø 1-2 mm	Ø 3 mm	Ø 4 mm	Ø 5 mm	Ø 6 mm	Ø 8 mm	Ø 10 mm
	Wrought aluminum alloys	400	0,008	0,010	0,015	0,020	0,023	0,028	0,038
	Aluminum cast alloy	360	0,007	0,009	0,014	0,019	0,021	0,026	0,036
	Copper/brass alloy	280	0,008	0,010	0,015	0,020	0,023	0,028	0,038

Others

Werkzeugbibliothek für Fusion360 downloaden

Wir bieten eine Werkzeugbibliothek für den direkten import in Fusion360 an. In der Bibliothek sind unsere VHM Einschneider für Aluminium bereits mit technischen Daten und Schnittparametern hinterlegt.

Werkzeugbibliothek für Fusion360 downloaden