Solid carbide end mill Z=1 for plastics d=8.0, A (25), CrN prism

Solid carbide end mill Z=1 for plastics d=8.0, A (25), CrN prism

SKU: 1218-103
GTIN: 4251953303298
Category: Endmills

Coating
Length
Cutting diameter

27,12 €

incl. 19% VAT , plus

Low stock level
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

Solid carbide (VHM) single tooth cutter

The single tooth cutter was specially developed for cutting plastics that tend to clog the cutting edges. The polished and large flute of the single tooth cutter enables very good chip removal and thus prevents the cutting edge from clogging. The faceted surface of the cutter ensures very smooth cutting edges.

Area of application: Plastics such as acrylic glass, PVC, POM

Supplied in a practical plastic sleeve.

Technical data (Tech specs)
Number of flutes	1
Helix angle (helix angle)	35°
Composition	90% Wc / 10% Co
Grain size	0.6 µm

Choice of coating

Coatings protect the cutting edges from abrasive wear and reduce cutting forces. A significant increase in efficiency can be achieved, particularly in series production, thanks to higher feed rates and fewer tool changes.

	CrNprism coating The CrN prism coating (CrN-Si-O2) is an amorphous glass-like top layer. Especially for glass fiber reinforced plastics

ZrN coating

The ZrN multilayer coating is characterized by a smooth surface and very good ductility.

Universal coating for plastics processing

Diameter	Shank	Cutting length / total length (mm)
Diameter	Shank	Length A	Length B	Length C	Length D	Length E	Length F	Length G	Length H	Length I	Length J
1	3,175	3 / 38	-	-	-	-	-	-	-	-	-
1,5	3,175	7 / 38	12 / 38	-	-	-	-	-	-	-	-
2	3,175	4 / 38	6 / 38	8 / 38	12 / 38	15 / 38	17 / 38	-	-	-	-
2,5	3,175	8 / 38	12 / 38	15 / 38	17 / 38	-	-	-	-	-	-
3,175	3,175	8 / 38	10 / 38	12 / 38	15 / 38	17 / 38	22 / 45	25 / 50	28 / 55	32/55	42/70
4	4	12 / 45	15 / 45	17 / 45	22 / 45	25 / 45	28 / 50	32 / 55	42 / 65	52 / 80	-
5	5	17 /45	22 / 45	25 / 45	28 / 45	32 / 50	-	-	-	-	-
6	6	12 / 50	17/ 50	22 / 50	25 / 50	28 / 58	32 / 58	42 / 70	52 / 80	-	-
8	8	25 / 50	32 / 60	42 / 70	52 / 80		-	-	-	-	-
10	10	32 / 75	42 / 80	52 / 100	62 / 110	-	-	-	-	-	-
12	10	32 / 75	42 / 80	52 / 100	62 / 120	-	-	-	-	-	-

Cutting speed and tooth feed:

Cutting data solid carbide milling cutter for plastics
Material		Cutting speed (m/min)	Tooth feed (mm/rev)
Material		Cutting speed (m/min)	Ø 1 mm	Ø 2 mm	Ø 3 mm	Ø 4 mm	Ø 5 mm	Ø 6 mm	Ø 8 mm	Ø 10 mm	Ø 12 mm
	Acrylic glass (PMMA)	200	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	POM GF25	160	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PA6.6	200	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PA6.6 GF30	150	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
pEEK	150	0.015	0.020	0.030	0.040	0.050	0.060	0.070	0.080	0.100
	PEEK G30	130	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PF 31 (Phenoplast)	130	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	Honeycomb sandwich Hollow body composites	130	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PTFE CF25	160	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PVDF GF20	180	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100
	PE-HD	160	0,015	0,020	0,030	0,040	0,050	0,060	0,070	0,080	0,100

The cutting data listed are guide values that must be adjusted depending on the specific boundary conditions
(stability and performance of the machine, workpiece clamping, type of coolant supply).